Dinky Dot's Dollhouse

18/05/2026

🩵 NEW! 🩵 dinkydotsdollhouse.etsy.com/uk/listing/4507120062

A mix of baby blue and white pressed glass beads, including electroplated glass and genuine Preciosa Czech pressed glass. Threaded onto stainless steel head and eye pins, stainless steel bead caps and wings, and fastened to a chain with stainless steel jump rings.

The necklace itself is a hypoallergenic Sterling Silver plated Stainless Steel rolo/cable chain, approximately 1.2mm thick, and 18inches in length. It fastens with a strong trigger lobster clasp and jump rings, and a short extension chain with stamped brand tag to fit most adults comfortably.

🧼 CARE: To ensure longevity, the pendant and chain should be gently cleaned if needed using warm soapy water on a damp cloth, and patted dry. Try to avoid prolonged exposure to chlorine, seawater, sweat, or harsh shampoos/soaps where possible.

🛟 ACCESSIBILITY: Longer extension chains, wider connectors, larger clasps, and various accessibility-friendly alterations and adjustments are available on request. Just drop me a message and I'll see how I can help.

🖌 COMMISSIONS: If you like this listing but it's maybe just not quite right for you, my commissions are OPEN and I can design you something that will be. Just ask!

•~•~•~•~•~•~•~•

• Etsy: dinkydotsdollhouse.etsy.com
• FB: facebook.com/dinkydotsdollhouse
• IG: instagram.com/dinkydotsdollhouse
• TikTok: vm.tiktok.com/ZMeG2EvQ3

18/05/2026

🩵 NEW! 🩵 dinkydotsdollhouse.etsy.com/uk/listing/4507113180

A mix of baby blue and white pressed glass beads, including handpainted glass, electroplated glass hearts, painted glass flowers, and genuine Preciosa Czech pressed glass. Threaded onto stainless steel head and eye pins, stainless steel bead caps and connectors, and fastened to a chain with stainless steel jump rings.

The necklace itself is a hypoallergenic Sterling Silver plated Stainless Steel rolo/cable chain, approximately 1.2mm thick, and 18inches in length. It fastens with a strong trigger lobster clasp and jump rings, and a short extension chain with stamped brand tag to fit most adults comfortably. The pendant and chain can be gently washed in warm soapy water and patted dry.

🛟 Longer extension chains, wider connectors, larger clasps, and various accessibility-friendly alterations and adjustments are available on request.

If you like this listing but it's maybe just not *quiiite* right for you, my commissions are OPEN and I can design you something that will be. Just ask!

•~•~•~•~•~•~•~•

• Etsy: dinkydotsdollhouse.etsy.com
• FB: facebook.com/dinkydotsdollhouse
• IG: instagram.com/dinkydotsdollhouse
• TikTok: vm.tiktok.com/ZMeG2EvQ3

•~•~•~•~•~•

18/05/2026

♻️ NEW! ♻️ dinkydotsdollhouse.etsy.com/uk/listing/4507104398

A 100% upcycled necklace, with a faux moonstone cabochon and rhinestone pendant attached to a silver plated steel chain.

I've fastened these pieces together using stainless steel jump rings. The necklace is finished with a stainless steel trigger lobster clasp, steel jump rings to hook through, and an adjustment chain to change the length to suit you.

If you like this listing but it's maybe just not *quiiite* right for you, my commissions are OPEN and I can design you something that will be. Just ask! 👋

♻️ The Scrapyard ♻️

This listing is part of my SCRAPYARD collection, and it was created using upcycled parts!

I source jewellery parts destined for the bin due to breakages or other issues, by searching local UK charity shops or asking bead factories for their floor sweepings.

I clean, repair, restore and reuse as many components as possible, including beads, pendants, wire, pins, chains, clasps and ribbons. These parts can be any material; like wood, acrylic, shell, steel, bronze, clay, and sometimes even real silver and gold!

I use these parts to create new pieces that exist nowhere else in the world. They are all unique one-offs and cannot be replicated - so you'll be the only person to own them! Some items can be simplistic, and others incredibly complex, but you can rest assured that each piece will have both a hidden history and a new lease of life.

18/05/2026

♻️ NEW! ♻️ dinkydotsdollhouse.etsy.com/uk/listing/4507094457

A 100% upcycled necklace, with a faux pearl and rhinestone pendant attached to a silver plated steel chain.

I've fastened these pieces together using stainless steel jump rings. The necklace is finished with a stainless steel trigger lobster clasp, steel jump rings to hook through, and an adjustment chain to change the length to suit you.

If you like this listing but it's maybe just not *quiiite* right for you, my commissions are OPEN and I can design you something that will be. Just ask! 👋

♻️ The Scrapyard ♻️

This listing is part of my SCRAPYARD collection, and it was created using upcycled parts!

I source jewellery parts destined for the bin due to breakages or other issues, by searching local UK charity shops or asking bead factories for their floor sweepings.

I clean, repair, restore and reuse as many components as possible, including beads, pendants, wire, pins, chains, clasps and ribbons. These parts can be any material; like wood, acrylic, shell, steel, bronze, clay, and sometimes even real silver and gold!

I use these parts to create new pieces that exist nowhere else in the world. They are all unique one-offs and cannot be replicated - so you'll be the only person to own them! Some items can be simplistic, and others incredibly complex, but you can rest assured that each piece will have both a hidden history and a new lease of life.

16/05/2026

BACK IN STOCK! 🌈 dinkydotsdollhouse.etsy.com/uk/listing/4460765334

THE OFFICIAL, GENUINE, AND COPYRIGHTED 'Holly's Heart' rainbow bracelet, worn by 'Holly the Heroic' in Season 5 of Netflix's smash hit 'Stranger Things' Season 5. 🌈

These elastic super stretchy bracelets come in two colourways - bright rainbow (the original) or pastel rainbow, and are available in either adult/large size (approx. 20cm) or kids/small size (approx. 16cm).
They are made with plastic beads and StretchMagic 1mm elastic cord, with the knots sealed with a dab of epoxy resin.

✏️ THE STORY ✏️

These bracelets are replicas of the one I created back in 2023, worn by the actress Nell Fisher as part of her Holly Wheeler costume (but with extra colour beads added in to make them adult size).

I had the original bracelets listed in my shop back in 2023, and got contacted via Etsy, and asked if I could make a few duplicates of them. The buyer wanted the design altered to fit a child so I removed the black beads and, and happily sent them to a place called Cedar Lodge Costumes over in Georgia, USA.

I had absolutely NO idea that this was the team working on Stranger Things, as I wasn't told at all, until I by pure chance found out via InStyle magazine in 2026! I checked my order history and matched up the screenshots, and sure enough - my bracelet had been on the biggest show in the world!

Since then, I've had confirmation from multiple sources that I was the original maker, and I've now registered my blueprints and the full design under copyright, so you can be sure you're getting the authentic real deal as a collector or casual wearer.

📃 AUTHENTICITY 📃

You can request a PDF digital copy of the official certificate of authenticity, with the buyer's name on, if you so wish. These are all hand-signed, dated, and numbered by me, and each bracelet has a unique authentication number so you'll know which issue piece you own.

⚠️ PRE-ORDERS ⚠️

If your desired option is sold out, please select the PRE-ORDER version instead to be added to the priority list - so I don't overproduce and create any waste! Wait time is currently approx. 2-3 weeks for pre-orders due to the delivery times of my bead manufacturer, but you will be informed ASAP once your order is ready. I make these constantly and try to always have ready stock!

16/05/2026

Restock incoming! 🌈

dinkydotsdollhouse.etsy.com

06/05/2026

30/04/2026

💎 NEW! 💎 dinkydotsdollhouse.etsy.com/listing/4497199676

A 100% upcycled necklace, with silver-plated steel panels of glass rhinestones. The faux crystal rhinestones are a mix of diamanté styles and various cuts, and sparkle under light like Georgian-period pieces.

I've fastened these plates together using stainless steel jump rings. The necklace is finished with a stainless steel trigger lobster clasp, steel jump rings to hook through, and an adjustment chain to change the length to suit you.

If you like this listing but it's maybe just not *quiiite* right for you, my commissions are OPEN and I can design you something that will be. Just ask! 👋

♻️ The Scrapyard ♻️

This listing is part of my SCRAPYARD collection, and it was created using upcycled parts!

I source jewellery parts destined for the bin due to breakages or other issues, by searching local UK charity shops or asking bead factories for their floor sweepings.

I clean, repair, restore and reuse as many components as possible, including beads, pendants, wire, pins, chains, clasps and ribbons. These parts can be any material; like wood, acrylic, shell, steel, bronze, clay, and sometimes even real silver and gold!

I use these parts to create new pieces that exist nowhere else in the world. They are all unique one-offs and cannot be replicated - so you'll be the only person to own them! Some items can be simplistic, and others incredibly complex, but you can rest assured that each piece will have both a hidden history and a new lease of life.

28/04/2026

A few people asked to see my most recent custom commission, so here's a few snaps of part of it!
I was asked to create a set to be worn as part of a cosplay - a choker, clip-on earrings, and a glasses chain. I was given some inspo pics and the colours gold, red and black - I'm a silver girl so not a palette I often use! 💛❤️🖤

I wanted to try my hand again at beadweaving as it's been a while, so dug out my beading loom and used a flat weave (similar to Pe**te stitch) to weave rows of glass and gold-plated steel seed beads. The centre bead was a painted acrylic gem I had in my collection, and the dangles were upcycled vintage gold charms from my Scrapyard stash! I loved weaving this necklace, and I definitely want to create more pieces on my loom to improve my technique - I'll be practicing more often to see what else I can do!

The earrings are a mix of gold-plated chains, gold-plated steel beads and charms, pressed glass teardrops, and pressed sprayed glass moons. They came out so delicate but dramatic at the same time!

I cannot WAIT to see my customer all dressed up in their complete costume with all their sparkly custom pieces to finish off the look - I'll share some pictures when I do! 🤞

Let me know what you all think of this set in the comments! 🙏🏻

If you want your own shiny bit of custom goodness, my commissions are OPEN. I can work to any budget, style, size or theme required, and you'll be included every step of the way and receive photos before you pay. Everything can be giftwrapped too and posted anywhere in the world. Just drop me a message to get started! 😊