J & R Jewellery

29/04/2026

Hometime at last!

Before I go, these three platinum full eternity rings will be coming up for sale to help our customer out. I'll calculate rough carat weights for each ring, but as you can see they're pretty substantial. The stones are all natural, not labs.... just so you know.

Details and prices to follow.

29/04/2026

29/04/2026

900-960°C

29/04/2026

1768°C

🔥

28/04/2026

Our 18ct signet ring from Saturday is on its way to our trusty hand engraver.

25/04/2026

Our customer had an 18ct signet ring that he loved, but was concerned it was getting thinner with wear. It was still quite chunky in my opinion, but he insisted we topped it up a bit and re-engrave the initials. He supplied us with 9g of additional 18ct making a total of 24.5g once itd been melted and I then added another 6 to allow for a casting sprue and any filing.

Because it's going to be heavier than the average I decided to make a silver blank to use as a guide. With shrinkage in the mold the final weight should be about right once filed to shape. As it turns out, I was pretty spot on and before polishing etc we're at 26.6g.

We'll get it prepped for engraving next week 👍

25/04/2026

One to watch! Keep pushing Reza Seewooruthun

More from the Redbull Ring tomorrow....

https://www.youtube.com/live/k1gwLbvohxU?is=uZftFtY-eKiIm6Yv

24/04/2026

Local lad Reza Seewooruthun is back in action this weekend in FREC with his Rodin machine. You can catch him on YouTube as usual. Race 1 is here: https://www.youtube.com/live/tYorbWbaIVM?is=F7tCRCeFMkg5qHO5

Best of luck to you buddy 👍

Only 3 weeks until my own race debut btw 👀

24/04/2026

Our customer had a pair of heart shaped opals that she wanted made into some drops to go on a pair of diamond studs. She also had a 9ct yellow gold charm to use in the project.

Test fitted only today, will set properly tomorrow.

23/04/2026

2 inch extension piece made for our customers chain, using an old pair of cufflinks they'd supplied..

23/04/2026

Another recovery job on the bench today. I'm not even sure what the customer did to end up with the ring in such bad shape, but after a bit of work I managed to get it back to being wearable.

23/04/2026

👀