InFront Models

13/03/2024

Next time you’re at the Australian Modeller shop, check out the new sample displays that have been created for your modelling inspiration.

10/03/2024

Hello all!

2 new products from IFM for the month of March. Pipe loads to suit 22ft open wagons or longer.
Four stack high of strapped pipes and bundled pipes with cradles.
Suits the NSWGR K wagon, VR GY,RY variants and, SAR OBf variants.

The website has now been moved to a new host server. Still a few minor tweaks and improvements are still being made. Online orders are now being processed as normal.

23/02/2024

Hi all!

The InFront Models website is going through an extensive upgrade. Currently some pages will come up with an error message or will not load. This should be fully resolved in the next week.

08/01/2024

New from IFM for 2024.

22'0" wagon loads to suit the NSWGR "K" wagon, VR "GY" & variant wagons and, SAR "OBf" and variant wagons.

Drum loads to suit 22ft wagons. This has been designed as separate pieces to help paint the drums as individual colours if required, to achieve a load appearance. The kit come as 11 pieces, the vertical footings can be trimmed at the base to allow for varying wagon depths depending on the manufacturer of the wagon being used. Price of the drum kit is $15.00.

Still on the 22ft wagon theme, Concrete Pipe loads to suit. A 2 piece 3D resin printed pipe to fit inside the various open wagons used by the railways. $14.00 for the pipe kit.

The smaller counterpart of the NSWGR, the "S truck", has had more created to add to the revenue roster. 44 Gallon drum loads, pipe loads both strapped and loose. Each priced at $13.00 per load.

loose cast concrete pipes for work site or construction scenes, or wagon load, $12.00 per pack.

Finally, Drums and pallets kit. 12 drums and 3 pallets to make up. $12.00 per pack.

02/10/2023

20'0" Transiflat "Cage" is nearing to being made available during this 4th quarter of 2023. At this point in time, kit will comprise of urethane cast base, Nickel Silver etchings, brass wire and decals.

Currently there is a revision of the ACT open deck container. It is hoped that it can be achieved as a one piece 3D printed model. However, there is a hurdle to overcome with the model warping overtime when exposed to heat. The 3D design takes into account the lash points along the side and the inside of vertical ends, the waffle panels and container lock blocks. Wooden deck decal has been drawn to represent with a weathered effect.

02/10/2023

Hi all!
Yes it's been a very long time since there's been any word from IFM, here on Facebook.

The IFM website has been updated with a number of new products to be introduced to the range.

- Cast concrete pipe loads
- Steel I beam loads
- Long pipe Loads
- Boxes and Sacks loads
- Torpedo and flettner vents
- Nickel silver NSW brake wheel etchings

All these items are now available to purchase on the IFM website.

www.infrontmodels.com.au

25/07/2021

G’day all!

Just a quick post from IFM.

OCL container decals are now available in HO scale. These suit both smooth and waffle sided containers. $6.00 each for the decal sheet. Comes with instructions for the location of the decals. These decals suit white containers only.

“OCL” decals to suit HO scale ribbed or waffle sided container. Decals need to be applied to a white painted container. All decals...

30/05/2021

Hi all!

InFront Models has produced a small run of the, NSWGR, four wheel sleeper wagon kits once again.

These wagons have proven to be very popular with modellers in the past , and won't be around for long.

The kit comes with the following parts:
• Cast floor & ends x 1
• Brass etching x 1
• 0.40 brass wire x 2
• Cast sleeper load x 2
• Bulk heads x 2
• Mounting lugs x 2
• Decal sheet x 1
• Austrains® under frame/couplers/screws/lids
• Metal cast buffers X 4

Price of each kit is $50.00 and ready to order from InFront Models.
https://infrontmodels.com.au/product/nsw-sleeper-wagon-kit/

23/05/2021

New product has been added to the IFM range.
NSW Police car dress up kits are now available. This suits, Auscision Models, XD falcon and VB commodore vehicles.
Kit contains 3D printed light bars, blue lights and decals, to do one of each type of vehicles. Instructions also included.

Price of the kit $12.00

https://infrontmodels.com.au/product/nsw-police-car-dress-up-kit/

22/05/2021

Hi all!

After a couple of false starts, the InFront Models website is now back up and working once more.

www.infrontmodels.com.au

Welcome to InFront Models Producers of quality detailing parts and kits for the modeller of the NSW railways. An Australian based model supplier, creating an easy, simple way to achieve a spectacular build. We hope you enjoy browsing our products. Lastest Products Strapped Sheet Metal load Uncategor...

04/04/2021

I know I keep teasing you with up and coming kits. Well here’s another one.
WSC sleeper wagon. This is a two piece kit. What has been photographed, all the detail is 3D printed so all that needs to be done is laminate the top and bottom together. Extra pieces to finish off the kit like brake pipes, brake wheel etchings and bogies, will finish the model in just a short period of time ready for painting.

With regards to the WFX container wagon. I’ve been frustrated by how it comes together and, I’m not happy with its current configuration. My apologies for the delay with this kit.
Website should be back up next week now.
More news soon for you all.

Regards,
Aaron

22/03/2021

Hi all,

InFront Models website is down at the moment.

Will be up and going again in the next week or two.

Thank you for the messages from concerned customers about the website being down.